Waste Plastic Washing Line
Waste plastic washing system include: PET washing line, PP film washing line, PE granulating line, EPS melting machine, single&twin shaft plastic shredders, hydraulic pressure packing machines.
- Defining the amount of contamination in the applicable material.
- Defining the final usage of the finished product.
- How much capacity you need
Based on these specifications we would be in a position to engineer and manufacture a complete modular waste plastic recycling machines for the application.
The modular system maybe consist of:
Bale breaker: For debale the baled PET bottles
Belt conveyor: Transport materials
Pre-washer: to separate foreign material such as glass, metal and stones.
Label remover: for separating the labels and other loose and foreign materials
Screw feeder: Transport materials as well as rub them for surface clean
Metal detector bridge: For detection of NE metal and protect the granulator and washing components
Separation table: For separate the foreign materials manually
Crusher: Crush the materials to flakes of 15mm (two series: one for PET, one for PP/PE)
Hot washer: clean the materials in hot water, sometimes with some chemicals
Poaching tank: For separation of the flakes with a specific density of <1g/cbm from >1g/cbm or in contrast to separate the flakes with a specific of > 1g/cbm form <1g/cbm
( PET >1g/cbm and PP/PE <1g/cbm )
Friction washer:
Surface clean the materials ( two series: one for PET, one for PP/PE)
Dewatering machine:
for mechanical surface drying of the material flakes with rotating roller ( two series: one for PET, one for PP/PE)
Blowing and drying system:
1. For discharging and transporting the material from the dryer 2. For final drying of the material to the necessary residual level for down stream material processing
Cyclone silo:
1. for separation of dust and fine material to achieve a better quality final product
2.Storagefor the final products
Chinese
English
Russian
