Follwing details are needed in installation of a recycling system

- How much capacity needed of this line
- Defining the amount of spoilage or contamination in the will recyled material.
- Defining the final usage of the finished product.

Based on these specifications we would design and manufacture a complete modular system for the application.

The modular system maybe consist of:

Bale breaker: For debale the baled PET bottles

Belt conveyor: Transport materials

Screw feeder: Transport materials as well as rub them for surface clean

Metal detector bridge: For detection of NE metal and protect the granulator and washing components

Separation table: For separate the foreign materials manually

Crusher: Crush the materials to flakes of 15mm (two series: one for PET, one for PP/PE)

Hot washer: clean the materials in hot water, sometimes with some chemicals

Poaching tank: For separation of the flakes with a specific density of <1g/cbm from >1g/cbm or in contrast to separate the flakes with a specific of > 1g/cbm form <1g/cbm
( PET >1g/cbm and PP/PE <1g/cbm )


Friction washer:
Surface clean the materials ( two series: one for PET, one for PP/PE)


Dewatering machine:
for mechanical surface drying of the material flakes with rotating roller ( two series: one for PET, one for PP/PE)

Blowing and drying system:
1. For discharging and transporting the material from the dryer 2. For final drying of the material to the necessary residual level for down stream material processing

Cyclone silo:
1. for separation of dust and fine material to achieve a better quality final product
2.Storagefor the final products